Posted by clueless [201.198.209.8] on Monday, April 29, 2013 at 21:40:34 :
In Reply to: Re: Dana 60 vs Chrysler corp 9&5/8" third member posted by Kaegi [24.16.253.154] on Monday, April 29, 2013 at 21:04:47 :
i will make those tuff replacement axles with cups like the front if not in this life time then the the next
if you have never seen one look at the wc63 front axle shaft way beefier than the wm wdx, as i have said before the splines are the same but in the case of the shaft the 63 is as thick as the od diameter of the spline and in the case of the wdx wdm m37 the axle shaft area is thinner than the spline area by about an eigth of an inch and i thnk the thicker shaft will lend more strength to the spline area so it does not flex so much and break
Follow Ups: