Pic, note one tube missing?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chris Case [75.36.36.53] on Saturday, April 06, 2013 at 21:17:13 :

In Reply to: Current project, grill wasn't enough... posted by Chris Case [75.36.36.53] on Saturday, April 06, 2013 at 20:53:57 :

Most guys would push the fins away, snip the tube, fold it over, and solder the end. I prefer to push the fins away, snip the tube, heat the stub until solder melts, remove stub, add some solder until the hole in the header is covered. Then push the fins back into place with a knife blade, and 'comb' into final position with wire brush.

See how the tubes come in pairs, except one missing?




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com