Posted by johnd [71.246.80.60] on Saturday, March 23, 2013 at 09:02:59 :
In Reply to: Lets talk Plasma cutters posted by Tim Holloway [69.54.28.229] on Friday, March 22, 2013 at 20:07:30 :
Tim,
Before you buy one, make sure your compressor has enough CFM output to maintain pressure.
If not, you might buy the plasma cutter, then shell out to buy a new (bigger) compressor. Remember, the size of the tank is not as important as the output of the compressor.
Check the requirements of the plasma cutter and compare it to the CFM output of the compressor.