Posted by Sterling [99.98.76.231] on Sunday, March 17, 2013 at 13:35:23 :
https://www.facebook.com/photo.php?fbid=10151385249174542&set=a.10150952190274542.423211.656084541&type=1&theater
Here is a photo of my solenoid:
The small left terminal with an orange wire is coming from the IGN terminal on the starter switch.
The largest red wire furthest to the right goes to the battery.
The second furthest from the right is a red wire going from right post along with battery wire to the BAT terminal on the ignition switch.
The left large post is a grey wire to the starter.
And smaller red is on smaller right post because the instructions say "right post"
My diagram doesnt match my instructions so im hoping you might be able to help. The starter is engaging on the setting before the spring loaded turn where it would normally start. Ive looked at the diagram numerous times and im out of ideas.
Follow Ups: