Posted by Chris Case [75.36.41.219] on Sunday, March 17, 2013 at 08:16:09 :
In Reply to: Todays work.... posted by Nick [99.100.212.49] on Sunday, March 17, 2013 at 00:07:36 :
It'll fix a lot of vibrations and noise if you shim the t.c mounts to attain proper drive shaft angles. I used 1/2" fender washers it took 1/4" in the front, none in the back holes. You'll need an accurate protractor with a bubble, check every u-joint angle. On mine, they were all over the map, but shimming the t/c and PRESTO! each pair into exact alignment.
The speedo cable is available at parts stores, try the archives, I've posted it, maybe Vaughn put it in the PIF? It's for one 4" longer than stock, $18. An extra four inches has never been a problem in use.
Follow Ups: