Posted by John S [71.112.3.103] on Sunday, March 10, 2013 at 12:47:43 :
In Reply to: Re: WM 300 67 -68 brake pedal question posted by mannyc [173.77.221.241] on Sunday, March 10, 2013 at 10:52:42 :
The bracket is the under floor original from a 1968 wm 300.The pedal assembly is in good condition . A toolmaker refurbished it . (Me) It bolted right in to the existing holes in the frame. It is piped but not bled yet that is why I noticed the interference. There is not any real adjustment left to right on the bracket or column It seems to be in the proper location relative to the floor location. I did not use the original spring hanger. It has a screw for a stop ,but that stop is the up travel. I drilled and tapped the bell housing for that stop instead of using the spring bracket. I have studied some photos of the pedal set up they look like mine ,but the are all in the up position.