Posted by gmharris [71.105.35.169] on Thursday, February 28, 2013 at 23:08:48 :
In Reply to: Plastic disk in speedometer ? posted by Tom @ Snake River [173.198.178.175] on Thursday, February 28, 2013 at 22:52:25 :
Be careful when you pop off the center hub. If you break the center shaft you are done. And, you are pulling directly on the shaft.
I used a couple of plastic tools that are used to remove the door panels. One tool one each side of the hub and then, gentle pressure.
If I did it again, I would put a drop of WD40 on the center hub and let it sit for a day.
Hopefully, your hub will pop of easily. If not, be patient.