Flywheel spacer, 360/Poly issue SOLVED!

Posted by Tom in Indiana [216.249.74.130] on Thursday, February 21, 2013 at 14:07:43 :

Hey, guys. Good news. After pulling my hair out, gluing it back on, then pulling it out again, I've finally found out how to get a 360 in front of a Poly bellhousing. I talked to Dave at Hughes Engines in Illinois, and he said he could match balance the Poly flywheel to the 360 one, no problem. Cost- $110, plus shipping. You just have to send him BOTH flywheels, so he can match them up. I've dealt with Hughes quite a few times in the past. I have no idea why it slipped my mind to ask them before. This was really giving me fits, as you all know. We're good to go, now!!!

Follow Ups:

• Shipping two flywheels both ways, + $110? - Chris Case 15:44:14 02/21/2013
  • Re: Shipping two flywheels both ways, + $110? - Tom in Indiana 15:55:42 02/21/2013
    • So drill half on each side of the hump- or on the hump.. - Chris Case 19:38:34 02/21/2013
      • Another Idea? - gmharris 00:59:26 02/22/2013
        • Re: Another Idea? - Tom in Indiana 01:16:45 02/22/2013
          • Re: Another Idea? - gmharris 12:25:20 02/22/2013
      • Re: So drill half on each side of the hump- or on the hump.. - Tom in Indiana 21:59:24 02/21/2013
• Re: Flywheel spacer, 360/Poly issue SOLVED! - mannyc 14:41:32 02/21/2013

Post a Followup