|
|
Posted by Tom @ Snake River [173.198.178.175] on Thursday, February 21, 2013 at 00:17:53 :
In Reply to: Re: Reassembled the doors today ! posted by Larry - Orlando [99.189.142.208] on Wednesday, February 20, 2013 at 20:51:43 :
I did not address the fuzzy strip along the top. It should be done first, but hoping to do it later. Getting a new one to conform is a pain.
Also, VPW sent me 3 or 4 little rubber bumper gizmos, and an inch and a quarter long. What are those for ? ?
Also remove the 2 limiter buttons in the window channel. Clean the channel and inspect the stud and spring mechanisms on the bottom of the rods. After you get them in, lube with some type of good lube that will hang in there a long time.
Follow Ups: