Reassembled the doors today !


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tom @ Snake River [173.198.178.175] on Wednesday, February 20, 2013 at 20:38:23 :

Well I got a lot of practice. Here is the order.
1. Install door latch by extending the arm up through the top wondow channel and then rolling the latch into position. Think of a high jumper clearing the high bar. Getting the latch to retract was also a minor problem.
2, Install the 3 sided door handle mechanism.
3. lube up, and then install the window regulator.
4. Install the window channel making sure it is straight.
5. Put the front window channel piece down in the door and sitting towards the front.
6. Slide the window in from the top inside. Rear side first. When it gets down in the door rotate it to is position. Bring it upward and get the rear into the back channel and side it down into the door.
7. Lift the glass and do what ever it takes to get the front window channel into position on the glass and secure the screws to it.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com