Re: Hydro boost and pump questions


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Ggg [98.213.202.88] on Saturday, February 09, 2013 at 17:30:41 :

In Reply to: Hydro boost and pump questions posted by Bruce in BC [24.207.103.161] on Thursday, February 07, 2013 at 10:27:27 :

I have had backpressure issues using the 'Y' fitting in the past. It helped if I used a special "Y" fitting that had a larger size orifice after the two lines combined. I eventually took took my remote reservoir off and tig welded two return line bungs to it and have both booster and P/S returns run separately into the reservoir. The feed line from the reservoir to the pump needs to be big and as vertical as possible, I would say a -12 at least. I did remove the canned ham reservoir from my pump and tig'ed a big bung to it as well for the feed line.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com