|
|
Posted by wayneh [68.55.55.71] on Wednesday, February 06, 2013 at 20:45:37 :
Well, after replacing my cylinder head gasket and stopping that pesky water leak, I noticed another slight leak around the pulley on the timing chain cover. I've read the archives, and looked at my Chrysler Industrial engine book, but I can't find much information on the "plate" and gasket that are behind the timing chain cover.
I've ordered a new gasket set, I've got the new oil seal (and a speedi-sleeve) that I've been wanting to replace, but I wonder if anyone might have any advice on this. The hardest part for me is removing the radiator and shell since I work alone, but I'd prefer to do this job once if anyone has any suggestions to help.
I checked and cleaned the water distribution tube last year (which solved the overheating problem...) but I will pull the tube to check how it is doing since the radiator will be out.
Thank you
Wayne
Follow Ups: