|
|
Posted by Terry in CT [99.16.210.39] on Wednesday, December 12, 2012 at 20:56:20 :
In Reply to: Re: Spitfire engine posted by Terry in CT [99.16.210.39] on Wednesday, December 12, 2012 at 20:47:12 :
Also this
Engines parts to rebuild these motors are available. Vintage Power Wagon, Andy Bernbaum in MA, Egge Machine are just a few places I have gotten parts from for my flathead rebuild.
Also
You can hop up the motors. There are dual and triple carb set ups for the engines. Earl Edgerton does a number of wonderful things for the flatheads as well. George Ashes in PA has a world of knowledge on mopar flatheads .
You can shave a stock head as much as .090, I would cut it at least .050 for more compression and pep.