Re: Need heating ideas for shop.....


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Ray [76.31.209.198] on Sunday, December 09, 2012 at 22:37:20 :

In Reply to: Need heating ideas for shop..... posted by Doug In CO [68.177.208.75] on Sunday, December 09, 2012 at 20:28:49 :

I have a friend in Iowa that built a new shop for his service station, he installed tubing in his slab prior to placing concrete for the foundation. He has a oil burner that burns used oil he collects from oil changes through the year and heats the water that circulates through the slab. It takes about two weeks for the slab to warm so he starts heating in the fall, but when you are on your back under equipment it is warm on your back and the warmth rises and warms the entire shop. The initial cost was pricey but basically heats the building for free, return on investment noticed immediately. If you concrete a section you can work on, the heat should chase out the moisture on the balance of the building.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com