|
|
Posted by Chris Case [75.36.45.253] on Friday, November 23, 2012 at 22:42:07 :
In Reply to: Re: Same gain each, but the gains are additve. posted by Dozerman51 [108.235.117.172] on Friday, November 23, 2012 at 19:50:15 :
Make a long plate that bolts to the three holes currently used for the levers, but extend rearwards, drill new holes further back, weld three nuts to teh inner side, and bolt it all up. Then shorten all them links.
Or change the heater.
Oh, the right side floor board will need some mods, it is different as is the center tranny cover.