Posted by Mike McClintock [66.82.162.16] on Wednesday, November 21, 2012 at 11:52:37 :
In Reply to: Re: File the pin holes in the bell? posted by Gary Troxel [50.47.170.157] on Wednesday, November 21, 2012 at 11:29:20 :
it's out of true? I would suspect the measurement before doing anything irreversable. Also remember, if you measured the eccentricity by, for instance, indicating off of the flywheel for one full revolution, that the actual error, is one half of the indicated difference.
MM
Follow Ups: