|
|
Posted by Dave [75.81.249.81] on Saturday, November 10, 2012 at 14:50:30 :
In Reply to: Re: New Spark Plug Wires? posted by CSCameron [68.228.198.56] on Thursday, November 08, 2012 at 15:37:34 :
Use an old set of slant six spark plug tubes, then use early ninties ford electronic ing. wires, backwards!! the end of the plug wire that fits on the ford coil pak is a press fit into the slant six spark plug tubes, cut the other end for whatever end you want to go into the distribitor cap. use a little anti-oxident grease in the cap holes, a very small bead of black silicone on the bottom of the cap, 1/16 or less. there is a small mod that has to be done to the wire end to fit the plug. I 'think' that this will require the use of ac plugs, I bought a set of champions and they were to long to let the wire end go down in the tube far enough. this works! ask anyone who was at the WV rally of Dave Horvath's. be aware that before you take your truck swimming there are other things that will also have to be attended to. Dave.
Follow Ups: