Re: Pic of escutcheon tool...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tim Holloway [69.54.28.229] on Wednesday, November 07, 2012 at 21:32:38 :

In Reply to: Re: Pic of escutcheon tool... posted by Ron Hardin [174.61.151.80] on Wednesday, November 07, 2012 at 11:47:45 :

Ron,
The M37 escutcheon is spring loaded. It has the rounded part and a straight collar. The straight collar will slide back into the rounded part. I have a trim removal tool I got from the local parts house, it is just a thin steel piece with a stepped notch. I slide it between the back side of the handle or crank and push it towards the door. The pin is not a roll pin, it is just a thin steel rod. It will slip right out with another thin rod, and drop onto the floor and roll into some dark recess. If someone has put in a roll pin you will need to drive it out but the correct pin is a fairly loose fit. It is hald in with the spring pressure from the escutcheon.
Tim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com