|
|
Posted by Tom in Indiana [216.249.74.130] on Thursday, October 25, 2012 at 14:13:28 :
In Reply to: Re: I've done it... well, sort of. posted by Greg Coffin [4.225.212.165] on Thursday, October 25, 2012 at 09:29:05 :
That's the housing you want to use, right there. I looked at my (old) notes that I scribbled down when I was working on mine, but unfortunately, none of it makes much sense to me now. However, write these down, because you will need a new cartridge/seal for your pump. I was going to cut up a new iron pump to rob the cartridge out of, but chances are that it would ruin the seal, no matter how careful I was. See what you can track down on these part numbers. They will help you along on your search. I asked Ray about making my own, and he only told me about shortening the housing .750". He wouldn't tell me anything more, even after I asked him again about it. Anyway, here's what part numbers I had written down:
WIB1630154
W3607-1 FAG
885613 NSK
382104 LILA
W7607-1
WPI-1014
GH661
I'm sorry it's not more informative, but everything I wrote down is gibberish to me now. If I can make head or tail of it, I'll let you know. Also, check into a slant-six cartridge. I know the bearing diameter and length is the same as the one you'll need, but I'm not sure why I can't say it will work. Crap. Let us all know how it works out for you. It'd be nice for someone to share it with us instead of certain individuals who only care about the monetary gain. Cheers!
Follow Ups: