Re: Windshiled Frame Screws?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by dan m [108.11.137.18] on Wednesday, October 17, 2012 at 22:15:42 :

In Reply to: Windshiled Frame Screws? posted by CSCameron [68.228.198.56] on Wednesday, October 17, 2012 at 18:38:20 :

i have had good luck using a oxy/acetylene torch with a brazing tip heating the head of the screw red hot and let in cool to just dull red and unscrewing them, works on the slotted originals also, this will ruin the glass though. i have not tried the impact method. i dont try to re-use the screws either. if you replace the screws make sure you use the full taper screws and not the undercut screws. the taper is needed to align and space the 2 halves of the frame properly. the pic is of an original slotted screw and the link is pics of different screws.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com