|
|
Posted by bill in pa [75.218.172.175] on Wednesday, October 17, 2012 at 20:40:36 :
In Reply to: Windshiled Frame Screws? posted by CSCameron [68.228.198.56] on Wednesday, October 17, 2012 at 18:38:20 :
I used a 1/2" impact gun, reduced down to 3/8" then to 1/4" so could use a phillips tip.
Came right out.Could not budge them with a standard screw driver. Go easy if you try this, dont just go all the way with the power.