Re: done puppy


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Daryl in Oz [202.67.116.209] on Wednesday, October 17, 2012 at 07:02:52 :

In Reply to: Re: done puppy posted by clueless [201.202.22.114] on Tuesday, October 16, 2012 at 19:36:13 :

With a shroud doesn't matter so much, but fan needs to be close to the hole diameter and the back edge of the fan pretty much level with the engine side of the hole. Without a shroud the front edge of the fan should be about 1" away, maybe up to 2". This is to get the best out of it, experiment a bit because maybe you don't need the "best". I'm running about 1" on a modified vehicle and seems to work OK, used to be just under 1/2" but found the fan would touch the fins under certain circumstances, so I did what you have done and used a spacer.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com