|
|
Posted by clueless [201.197.229.218] on Tuesday, October 16, 2012 at 00:59:04 :
well almost
ended up with a 3 tube deep 24 in. x 24 in tall radiatior (over all dimensions) the top tank is 4 in. tall and bottom tank is 2 in.s, so it is the same basic overall height as the stock but 3 inches. wider and could be another 2 inches before the winch shapt would be a problem but I could not find one that deep
could not find 4 tuber but hoping this will suffice for now
I put it in the truck and have 34 and a half in. from the fire wall to the tank(inside)
the radiator is in front of the original frame instead of inside it
the beauty is it mounts with the same bolt holes as the grill and the front clip the grill bolts too and can be installed or removed simply by unbolting the grill and it all comes out or goes back in
for reference the radiatior is now about half and inch behind the stock grill so there is also enuff room to put in a 4 tube hive
I bought a used one and fabricated some straps out of tabs off the radiator the we cut off cuz they were in the way and then we
soddered them to the radiator so they lined up with the holes in the grill inside the grill and it all bolts together in a sandwich
snug as a bug in a rug
Follow Ups: