|
|
Posted by Paul(in NY) [12.64.102.186] on Friday, September 21, 2012 at 09:55:24 :
In Reply to: W300 bed steps dimensions posted by Joe Cimoch [160.79.139.10] on Friday, September 21, 2012 at 09:23:58 :
My 1960, W300 Power Giant bed steps measure;
9.0" wide at leading edge of step x 32.50" long
The rear of the step at the body is bent 90 degrees up and is 1.50" high, then another 90 degree break towards the body where it meets the bed and that lip is .625" wide.
The front of the step is bent 90 degrees down 1.250" and has a rounded stamp
1/2 ways up the 1.250 measurement. The front of the step with this rounded
stamp goes from the front at the body to the fender.
Paul
Follow Ups: