Posted by EBH [204.111.86.249] on Thursday, August 23, 2012 at 19:57:16 :
In Reply to: PW - 2, Me - 0 posted by Desoto61 [98.166.17.169] on Wednesday, August 22, 2012 at 19:43:34 :
How bout mounting it on the other side of the engine and putting a actuator rod (pivoting rod) across the inside of the cab up under dash. Could use pillow block bearings as the pivots/supports for both ends of rod. Then a short pushrod into M.C. a lot of equipment is set up this way.