|
|
Posted by Daryl in Oz [58.178.158.126] on Tuesday, August 14, 2012 at 03:19:29 :
In Reply to: Anybody replaced their fuel pump diaphragm? posted by Sherman in Idaho [72.47.9.37] on Tuesday, August 14, 2012 at 02:46:52 :
It used to be common practice many years ago, but I haven't seen one of the old type for a long time. There were at least 2 different types I worked with, one had a nut that locked the support washers in place, just threaded onto the shaft from one side, the other type used slotted screws - one washer was welded to the shaft and the other clamped the diaphragm - think the nuts were captive/welded to the fixed plate/washer. You could buy the diaphragms pre-cut to suit, or buy/use material designed for it and cut your own.
Follow Ups: