Re: PTO Question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dave [75.81.249.81] on Wednesday, August 08, 2012 at 00:05:09 :

In Reply to: PTO Question posted by Brent in NV [208.66.12.145] on Tuesday, August 07, 2012 at 21:45:36 :

Brent, it's easier than you would at first think, the gaskets on the pto are shims, so the pto will have to be fit to the second trans. pull both pto plates so as to be able to access the gears on the pto. the settings on the big trucks(grain, dump, and mechaniec's trucks) is about .009 it takes a touch but it can be done without measureing tools. if it is too tight, it will howl like a banshee, if it is too loose it will howl like a banshee. I shoot for about .006, double the thickness of a hair. put the pto on and feel of the gears from the other window on the trans. trust your self, the worst that can happen is to pull and redo, quality time with your truck!! if your gear clearance is to tight you will have to buy or make more shims(gaskets) they can be bought at most truck supply stores. good luck Brent, any questions just holler out. Dave.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com