|
|
Posted by Terry [65.95.153.107] on Sunday, June 10, 2012 at 12:24:27 :
My projct truck the 43' WC63 is now at the stage of mocking up the hanging pedals and flushing and bleeding the steering and brakes. What's the best to start with bleeding the steering system or to get the brakes bled?. Installing the hanging pedals has been a challenge since the kit was designed for the taller firewalled PW's. A little trim and notch here and there and they are installed. Still have to mock up the steering shaft and wheel assembly and order a custom pitman arm to fit the saginaw box. Looks like it will work out fine but I have to move the oil filter to the passenger side firewall for clearances with the hydraboost setup. If it doesn't work as good as I hope I can always reverse the setups and go to stock as nothing has been modified.
Follow Ups: