|
|
Posted by chriscase [75.36.46.112] on Thursday, May 24, 2012 at 18:33:37 :
In Reply to: Re: Oil lines interfere? Always do. posted by HLake [174.226.129.122] on Thursday, May 24, 2012 at 13:50:39 :
Some have a lever with a cross pin hole, some levers have a rounded surface and no pin. Others have no lever and use a solenoid. Some use 9 teeth on the drive gear, some ten, to mate with either 146 or 153 teeth on the flywheel. But they all bolt in, you just have to jiggle it a little it'll fit.
Unless MAYBE the nose with the 10 teeth gear won't fit past the larger flywheel? But your number lines up with the most common denominator.