Posted by Greg Coffin [4.228.135.56] on Friday, April 20, 2012 at 13:55:31 :
In Reply to: No just the drive yoke. posted by Desoto61 [138.162.0.42] on Friday, April 20, 2012 at 13:43:15 :
Pull the yoke after you weld onto the seal housing. You don't want any of the weld splatter to get into the bearings or gears. I would chose welding over drilling and tapping for the same reason. Some of the seal housings are single wall, and you might dump chips into the differential once you penetrate the housing. :(
Follow Ups: