Re: Transfer case rebuild


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Wayneh [68.55.55.71] on Saturday, April 07, 2012 at 18:08:15 :

In Reply to: Transfer case rebuild posted by Larsonda [166.137.139.98] on Saturday, April 07, 2012 at 12:12:40 :

The shims need to be flat of course. The set the preload on the conical shaped bearings. The shims are available from McMastercar. Don't ask me how I know. Be advised... More shims= less pre-load on the bearings. Less shims= more pre-load on the bearins. The more the bearins wear, the less shims you need.

The shi goes on the right side of the bearing in the picture.

If you live in Maryland area I can help you rebuild it.

wayne



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com