|
|
Posted by keninco [72.1.111.1] on Sunday, March 18, 2012 at 11:02:45 :
In Reply to: Desoto posted by Paul(in NY) [12.64.140.98] on Saturday, March 17, 2012 at 22:51:58 :
The same happened on my driver side rear pin. Small turns and try pulling. Change the spring load by jacking. Pin is caught on spring because of high wear. Spin 90 degrees or 180 degrees is going to help some. The heating and waxing etc may help lubricate and break up hard grease. After I got my worst pin out I found the spring persch inner hole was ovaled out badly. I replaced perch. I wondered if the whallowed out hole made for worse alignment when I was pulling the pin.