|
|
Posted by Mike Hernke [166.147.72.152] on Tuesday, March 13, 2012 at 16:46:00 :
In Reply to: if push came to shove--ot---on topic posted by clueless [201.202.29.210] on Tuesday, March 13, 2012 at 09:20:41 :
I think most motor mounts are made for compression. All the motor mounts I have seen have a steel interlock in case the rubber fails. I believe in tension theinterlocking pieces will be in contact and there won't really be any isolation. I have seen custom mounts made using rubber bushings similar to leaf spring eye bushings inserted into dom tube these could be used in tension or compression