|
|
Posted by Greg Coffin [4.225.213.121] on Monday, March 12, 2012 at 00:51:44 :
In Reply to: clutch & break pedal slop posted by Bigngreen [75.68.27.77] on Sunday, March 11, 2012 at 20:55:21 :
There are bronze bushings in the support brackets. Mine were shot too. Just press then out and press in new. Any decent bearing supply house should be able to get you new ones, just give them the ID (shaft diam. 3/4"?), OD, and length, and you are good to go. Remember to drill them out for the grease zerks!
Greg