Re: 12 volt wiper motors at vintage pw


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by The Dodge Boys [64.121.152.7] on Saturday, February 25, 2012 at 13:38:52 :

In Reply to: 12 volt wiper motors at vintage pw posted by junkyardog [72.64.14.220] on Saturday, February 25, 2012 at 12:19:11 :

On the Vacumm side, Friken is very good. I had 4 motors done and they work Great. To help the vac source, as they slow down when you step down on the throttle. You can install a vacumm canister to store vacumm so when you hit the gas there is some reserve there to help out on hills. I enjoy the sound they make as they go back and fourth. If you hit the junk yards later model car have them under there hoods. Most are plastic round cylinders. The S10 Blazer and trucks have them under the hoods on the left side to help with the 4WD controls. Years ago Ford used a coffie can under there hoods to help with the Vacumm controled headlight doors. It really looked like a Coffie can. I have one and it helps. Good Luck Bill.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com