Re: pto shift lever


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Jerry in Idaho [69.59.83.175] on Thursday, February 23, 2012 at 20:16:50 :

In Reply to: Re: pto shift lever posted by Kaegi [24.16.253.154] on Thursday, February 23, 2012 at 18:20:50 :

The clevis has movement at the connection to the pto. The 3/8" fine thread bolt passes through a hole that is 1/2" in diameter. There is enough movement not to bind. The oversize hole and the jamb nut on the threaded end of the bolt give adjustment and holding of that adjustment.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com