|
|
Posted by Jerry in Idaho [69.59.83.175] on Friday, February 17, 2012 at 22:29:56 :
In Reply to: turn sig? posted by Glen Id [70.41.246.139] on Friday, February 17, 2012 at 22:12:36 :
Thanks, Glen. I used a piece of 2"x3" angle, cut in 1 1/4" width, then welded a couple of pieces of 1 1/4" strap to close it in. I tried them at the top bolt, but they were kind of close to the headlight bucket.