Re: Round Gauges installin in my 46PW


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Will (in IL) [98.215.26.138] on Wednesday, February 15, 2012 at 20:07:06 :

In Reply to: Re: Round Gauges installin in my 46PW posted by dave horvath [24.131.120.209] on Wednesday, February 15, 2012 at 19:50:43 :

The floor is covered in U-POL Products Raptor Truck Bed Liner. I've used two kits on the truck.

Areas I covered:
Under Cab, Under Fenders, Under Fender Engine Side Shields, Top of Running Boards, Inner Fire wall, Cab Floor and back below Headliner, kick panels, top and bottom of floor boards and tunnel cover.

Each part has two coats. Not as thick or heavy as a pro job, but if you want it thicker, you just have to keep adding coats.

Will

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-15%2013.24.48_46PW_CabBottomRaptorCoating.jpg

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-18%2016.46.50_46PW_CabRaptorLinerDone.jpg

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-18%2016.48.10_46PW_CabRaptorLinerDone.jpg

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-19%2013.40.38_46PW_RaptorBedLinerParts.jpg

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-21%2008.12.15_46PW_FloorPansInCab.jpg

http://powerwagon.wawii.com/images/46Blast&Paint/2011-12-19%2013.40.17_46PW_RaptorBedLinerParts.jpg



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com