|
|
Posted by Kaegi [24.16.253.154] on Sunday, February 05, 2012 at 11:53:26 :
In Reply to: Re: Kaegi Re: seems to me posted by clueless [201.202.29.210] on Sunday, February 05, 2012 at 10:18:50 :
maybe coudl machine stokc ones would have to measure but you cant go too much bigger in diameter because you hav eto be able to fit the axle through the spindle. the diameter of the stock axle is not the weak poiunt it is the coarse splines.
Follow Ups: