Posted by Neil on Tuesday, February 27, 2001 at 9:32PM :
In Reply to: Re:Mico Don't tear it down yet posted by MT Bob on Tuesday, February 27, 2001 at 3:01PM :
"In order to release the Mico lock the pressure applied with the pedal must be greater than the pressure of the fluid which was trapped when the Mico lock was applied."
That is not true as you release the MICO by fliping the lever, or in the case of an electrical unit, flip the switch. They have a spring loaded valve that snaps back regardless of brake pressure either in front or behind the valve....this is what sticks and the spring cannot overcome the force.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |