|
|
Posted by terry [74.15.32.13] on Thursday, January 05, 2012 at 13:41:53 :
In Reply to: ffpw front axle geometry posted by Fleabag [96.60.222.95] on Thursday, January 05, 2012 at 11:35:37 :
Fleabag; the 6x6 manual calls for a canber angle of 1 1/4- 1 3/4 degrees. The M37 manual calls for a camber of 1 1/4 - 1 3/4 degrees as well. The PW manual calls for an angle of 1 1/2 plus or minus 1/4 degrees so they are all the same. My PW with a set of power kings 900x16 on is starting to show some wear at the outside edges due to the same camber effect. I might have to get it checked and adjusted with shims at a vintage alignment truck shop. Perhaps your toe in is off and exaggerating the angle?. It does look like they lean a fair bit but the specs are all the same for all the trucks. Terry