|
|
Posted by Steve [75.42.156.162] on Sunday, November 13, 2011 at 18:09:11 :
Anyone know how to get the ends where the wiper blade mounts off the motor shaft. It appears that there are pins holding them in. I can't see a screw holding them in. I tried to pound them out with a punch, but didn't want to wreck them. I need to get the round part off to get the collar nut off to pull them through. My 61WM300 has a different style with a nut at the end of the shaft holding the wiper arm on. I'm missing one wiper on my truck so I figured I would liberate the set from the 47. Any advice would be appreciated.
Follow Ups: