Re: Need to hear from the experts


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Glen Id [70.41.246.139] on Tuesday, October 11, 2011 at 01:25:06 :

In Reply to: Re: Need to hear from the experts posted by Jim DeWolfe [74.82.68.36] on Monday, October 10, 2011 at 21:34:54 :

not hard with the right puller and driver, but it is getting to them that can be a problem.
I think I would first make sure that someone didn't just fill the knuckles with 90 weight thinking that is what was right instead of grease. If that was the case drain and fill with grease and you are good.
Otherwise get the proper size wheel bearing socket, pull the hub, unbolt the spindle and backing plate, slide out the axle shaft parts and you are in there.
I have the sockets in my shop but can't remember the size and it will be a week or so before I can walk that far to see.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com