Posted by Bill Wincapaw on Thursday, February 08, 2001 at 5:52PM :
In Reply to: Brake Shoe Question posted by Alabma Al on Thursday, February 08, 2001 at 4:48PM :
Both shoes are the same ( 15"X 1 3/4"), however wheel cyl bore is stepped 1 1/4" X 1 3/8" make sure the larger bore is facing rear shoe. This was the early way of compensating for enertia.
Regards
Bill Wincapaw
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |