|
|
Posted by Dozerman51 [71.139.181.250] on Thursday, September 15, 2011 at 16:58:53 :
In Reply to: Re: are those the vehicles with 430s posted by Kaegi [24.16.253.154] on Wednesday, September 14, 2011 at 13:39:30 :
All 1940 to 1953 Dodge 1 ton trucks came standard with the 4.30 ratio R&P. In 1946, the third member was strenghtned with the addition of two more pinion gears and 7/16" diam. mounting studs in place of the 3/8" diam studs. The optional ratio's for these trucks were 3.91(very rare) and the 4.89 ratio. In 1954, the 4.30 ratio was dropped as standard in favor of the 4.10 ratio. Get John Zentmeyers TM9-1806C Ordnance Maint.-Powertrain and Interchanges:Military/ Civilian 1941-1971. Book is available fron VPW. Great reference Book.
Follow Ups: