|
|
Posted by Jerry in Idaho [24.223.94.179] on Thursday, September 01, 2011 at 22:11:53 :
In Reply to: Re: Axle U-Joints posted by Bob In Indy [70.88.69.206] on Thursday, September 01, 2011 at 15:51:36 :
Alternative to that method: Clamp the yoke in a vise and use an old socket you don't care about that is just smaller than the bearing cap. Hit the socket hard with a big ballpeen hammer or small sledge. Be sure to remove the grease zerk first.
Follow Ups: