|
|
Posted by Matt Maund [207.255.125.67] on Saturday, June 25, 2011 at 17:19:35 :
In Reply to: 1978 power wagon posted by james pollaski [99.155.148.16] on Saturday, June 25, 2011 at 10:40:52 :
Typically they will only rub at the bottom of the wheel openings towards the front when turning sharp if the truck is on a bit of a twist. The remedy is to gently bend the wheel lip in further in the problem area. It doesn't have to bend in much and when you're done it isn't noticeable. Use pliers with tape on the jaws and work it a little at a time. Patience is the key here. I've done that to a few of my trucks over the years and it works great!