Manny, test your centrifugal first.

Posted by ChrisCase [75.36.42.225] on Thursday, June 16, 2011 at 08:52:58 :

In Reply to: Re: Does it ping? posted by mannyc [68.165.89.2] on Thursday, June 16, 2011 at 08:32:59 :

Hey, you did check your timing with the vacuum advance unhooked, if you have one?

To check centrifigal, Hook up the timing light, set the throttle at 2500, and check the timing with the dial on the light, that is what the dial is for.

I assume you are not running a vacuum advance on it, but you could check that too with the light and a hand vacuum pump.

I'll post some specs later.

Follow Ups:

• Re: Manny, test your centrifugal first. - mannyc 09:59:10 06/16/2011
  • Distributor advance curve specs 230 - ChrisCase 10:46:45 06/16/2011
    • Re: Distributor advance curve specs 230 - Milo in Pa 11:35:38 06/16/2011

Post a Followup