|
|
Posted by ChrisCase [76.212.213.152] on Sunday, April 17, 2011 at 23:45:35 :
In Reply to: so with a flathead posted by clueless [201.197.229.218] on Sunday, April 17, 2011 at 22:53:13 :
JaSan used Chevy axles too, so chevy drag link.
He ran into trouble with the tire hitting the Pitman arm in full right turns. But that was with aftermarket tires and rims on 1/2t Chevy axle. It looks like I 'll have clearance.
I expect to cut a Dodge drag link, turn and thread it to match the tie rod end used at the chevy pitman arm end. I'll make it as short as geometry will allow, to keep the box as far aft as possible.
Fender liner will need to be slotted, or the bottom edge cut, some kind of metal torture to get the shaft under/through it.
Follow Ups: