|
|
Posted by Daryl in Oz [210.50.228.4] on Tuesday, April 12, 2011 at 05:43:37 :
In Reply to: Re: 1947 cab posted by MontanaMatt [207.14.160.16] on Monday, April 11, 2011 at 12:04:24 :
I had to replace the section under the seat mount with a new curved section to clear the trans cross member, shorten the side sections, modify the firewall to accept the steering column and clear the clutch hosing, the PW floor doesn't fit without modifications to the WC floor, and had to make an extension to close the gap at the rear of the front fenders. At least this many mods.